Parts Separators

Bin Liners & Parts Separators

Breathable Netting Bin LinersUse plastic netting as a separating layer between valuable parts to minimize corrosion. Open mesh netting is breathable so air and fluids can flow freely to resist rust and corrosion. Cardboard or other solid materials can collect fluids and restrict air flow. Plastic Mesh Parts Separation Pads are:

  • Breathable & Stackable
  • Washable & Reusable
  • Dirt, grease & water resistant

Plastic Netting will not absorb fluids like cardboard dividers.

Because these versatile mesh dividers are reusable, they are ultimately more economical than competitive liners. It all adds up to improved parts quality at a lower cost. Use extruded plastic netting for bin liners, tote liners, basket dividers, and pallet liners to protect parts from chipping, scratching, corrosion and abrasion.

Parts separators are offered in polypropylene (more rigid) or polyethylene (more flexible) versions. For more caustic chemical applications see our PTFE (Polytetrafluoroethylene) netting.

Available in rolls or custom cut to the sheet size and length you specify

+ Color







+ Resin (material)



+ FDA Compliance



+ Thickness Range




+ Hole Size Inches Range





+ Open Area Range





XB1250 - Parts Separator 0.094" Diamond Polyethylene 3-ft x 50-ft

XB1250 - Parts Separator
0.094" Diamond Polyethylene
3-ft x 50-ft

$51.00

XB1175 - Parts Separator 1/4" Diamond Polyethylene 6-ft x 50-ft

XB1175 - Parts Separator
1/4" Diamond Polyethylene
6-ft x 50-ft

$136.00

XB1190 - Parts Separator 1/2" Diamond Polyethylene 6-ft x 50-ft

XB1190 - Parts Separator
1/2" Diamond Polyethylene
6-ft x 50-ft

$132.00

XB1233 - Parts Separator 1-1/4" Diamond Polyethylene 4-ft x 50-ft

XB1233 - Parts Separator
1-1/4" Diamond Polyethylene
4-ft x 50-ft

$83.40

XV1170 - Parts Separator 1/4" Square Polyethylene 0.08" Thickness

XV1170 - Parts Separator
1/4" Square Polyethylene
0.08" Thickness

 

XN1020 - Parts Separator 1/2" Square Polyethylene 0.09" Thickness

XN1020 - Parts Separator
1/2" Square Polyethylene
0.09" Thickness

 

+ Color







+ Resin (material)



+ FDA Compliance



+ Thickness Range




+ Hole Size Inches Range





+ Open Area Range