1.5" to 2.25" ID

Plastic Mesh Cores & Containment for Filtration


Rigid Mesh Tube measurements by Industrial NettingUse extruded mesh plastic tubes as center core supports and outer cages to build your cartridge filters. Nearly 100 configurations of diameter, wall thickness and open area are available from stock. Unlike molded tubes, minimal tooling costs are required for custom designs. Get the right combination of flow characteristics and structural support.

Rigid plastic tubes are extruded to produce fixed apertures with maximum dimensional stability. Most cores are made from polypropylene resin that complies with FDA regulations for food contact. Industrial Netting plastic cores are used in cartridges and as components for air, liquid and gas separation and filtration.

Common lengths are in stock for immediate shipment - or have us precision cut to your required sizes. Contact us for more information or to request a quote.

Tolerance capabilities are impacted by tube diameter, wall thickness, strand configuration and cut length. Please consult your Industrial Netting representative for specific tolerances achievable on your plastic rigid mesh tube.

Custom Sizes

Don't see what you need below? We can custom fabricate tubes to larger diameters from a variety of flat mesh or nonwoven products. Contact us now for more information.

+ Color


+ Resin (material)


+ Outside Diameter Range



+ Inside Diameter Range



+ Wall Thickness Range



+ Open Area Range





+ FDA Compliance


RN3850 - 1.73" OD & 1.5" ID, 15% Open Area

RN3850 - 1.73" OD & 1.5" ID, 15% Open Area

 

RN4810 - 1.69" OD & 1.5" ID, 39% Open Area

RN4810 - 1.69" OD & 1.5" ID, 39% Open Area

 

RN3690 - 1.69" OD & 1.58" ID, 43% Open Area

RN3690 - 1.69" OD & 1.58" ID, 43% Open Area

 

RN3851 - 1.84" OD & 1.64" ID, 23% Open Area

RN3851 - 1.84" OD & 1.64" ID, 23% Open Area

 

RN4460 - 1.93" OD & 1.7" ID, 32% Open Area

RN4460 - 1.93" OD & 1.7" ID, 32% Open Area

 

RN2620 - 1.85" OD & 1.75" ID, 32% Open Area

RN2620 - 1.85" OD & 1.75" ID, 32% Open Area

 

RN2530 - 2.02" OD & 1.825" ID, 41% Open Area

RN2530 - 2.02" OD & 1.825" ID, 41% Open Area

 

RN2135 - 2.135" OD & 1.89" ID, 13% Open Area

RN2135 - 2.135" OD & 1.89" ID, 13% Open Area

 

RN2535 - 2.045" OD & 1.9" ID, 27% Open Area

RN2535 - 2.045" OD & 1.9" ID, 27% Open Area

 

RN2700 - 2.16" OD & 1.95" ID, 13% Open Area

RN2700 - 2.16" OD & 1.95" ID, 13% Open Area

 

RN4430 - 2.34" OD & 2.15" ID, 35% Open Area

RN4430 - 2.34" OD & 2.15" ID, 35% Open Area

 

RN2221 - 2.385" OD & 2.165" ID, 15% Open Area

RN2221 - 2.385" OD & 2.165" ID, 15% Open Area

 

RN2222 - 2.43" OD & 2.225" ID, 13% Open Area

RN2222 - 2.43" OD & 2.225" ID, 13% Open Area

 

+ Color


+ Resin (material)


+ Outside Diameter Range



+ Inside Diameter Range



+ Wall Thickness Range



+ Open Area Range





+ FDA Compliance