Polytetrafluoroethylene (PTFE) Mesh
Expanded PTFE mesh is suitable for high temperature applications and highly caustic environments. It's also chemically resistant, self-lubricating, and inherently UV stable (UV radiation passes straight through causing no interactions.) Some other features include:
- Non toxic
- High anti-adhesiveness
- High dielectric properties
- Resin complies with FDA regulations for food contact
- Suitable for continuous use from -100°C up to 260°C (500°F)
Expanded plastic mesh is produced by slitting plastic sheet stock in a controlled pattern, then stretching or expanding the width to produce the designated nominal aperture (hole) size. Tolerances vary with apertures (hole sizes), weights, thicknesses and widths.
PTFE Mesh is sold by the lineal foot. Have us do the cutting to your custom requirements! Please consult an Industrial Netting representative to determine suitability of these products for your intended use.
PTFE products are stabilized to control open area percentages. As product thickness increases so does the likelihood of shrinkage in applications where temperatures are elevated.
Product: ET8120Color WhiteHole Size (in) Nom. 0.007 x 0.035Roll Width (in) 12Thickness (in) 0.006 to 0.010
Product: ET8200Color WhiteHole Size (in) Nom. 0.015 x 0.048Roll Width (in) 18Thickness (in) 0.012 to 0.018
Product: ET8300Color WhiteHole Size (in) Nom. 0.032 x 0.06Roll Width (in) 18Thickness (in) 0.011 to 0.018
Product: ET8500Color WhiteHole Size (in) Nom. 0.036 x 0.090Roll Width (in) 18Thickness (in) 0.023 to 0.033
Product: ET8700Color WhiteHole Size (in) Nom. 0.061 x 0.160Roll Width (in) 18Thickness (in) 0.050 to 0.065
Product: ET8800Color WhiteHole Size (in) Nom. 0.144 x 0.370Roll Width (in) 32Thickness (in) 0.066 to 0.086
Product: ET8900Color WhiteHole Size (in) Nom. 0.145 x 0.360Roll Width (in) 18Thickness (in) 0.070 to 0.085
Product: ET9000Color WhiteHole Size (in) Nom. 0.275 x 0.920Roll Width (in) 18Thickness (in) 0.095 to 0.125