 |
OSHA Regulations
1926.501(c)(1)
Erect toeboards, screens, or guardrail systems to prevent objects from falling from higher levels; or,
1926.501(c)(2)
Erect a canopy structure and keep potential fall objects far enough from the edge of the higher level so that those objects would not go over the edge if they were accidentally displaced; or,
1926.501(c)(3)
Barricade the area to which objects could fall, prohibit employees from entering the barricaded area, and keep objects that may fall far enough away from the edge of a higher level so that those objects would not go over the edge if they were accidentally displaced.
OSHA Regulations - Conveyors
1926.555(a)(5)
Where a conveyor passes over work areas, aisles, or thoroughfares, suitable guards shall be provided to protect employees required to work below the conveyors.
ANSI A10.11-1989 (R1998)
4.2
Neither public traffic nor workers shall be permitted underneath a work area unless they are protected from falling objects. In cases in which personnel nets are used, they shall be line with debris netting with a mesh of size and strength sufficient to contain tools and materials capable of causing injury.
Notes:
- RackGuard is designed for vertical applications on shelving and racks as a containment net.
DO NOT use for horizontal applications such as catch nets or any other form of passive protection.
- RackGuard is also suitable for end-of-aisle applications, shelf dividers, and lighter duty box applications.
- RackGuard can be cut to specific sizes at our factory to minimize onsite labor and simplify installation.
|
View and print our product literature:
|
7681 Setzler Pkwy N.
Minneapolis, MN 55445
800-328-8456 (in USA and Canada)
Phone: 763-496-6355 ¤ Fax: 763-496-6356
E-mail: info@industrialnetting.net
|
|
| | | | | | | |
|
 |
