Return Home



















Rail Car Netting


View and print our product literature:
  • Health, Safety, and Risk Consulting
  • Cargo Securement Article
  • Master Catalog

    • Meeting the Transportation Safety Needs of the Industry


    Video Illustrating Use of Car-Go-Net
    and Customer Testimonials
    Strong, disposable and economical cargo containment plastic net from Industrial Netting helps contain small, loose debris during the transport of crushed cars and vehicles to automobile and car shredders and metal recyclers. Installed properly, CarGoNet from Industrial Netting can reduce the risk of road hazards caused by falling debris and improve highway safety in the process.

    CarGoNet containment netting is ideally suited to comply with the Federal Motor Carrier Safety Administration's (FMCSA) Cargo Containment Regulation 392.132 for preventing loose parts of crushed and flattened cars from falling from vehicles in transport on the nation's highways.

    Scrap metal and scrap aluminum scrap dealers, auto crushers and recyclers are finding this strong plastic netting contains scrap metal and other recycling materials in rail transit and in sided over-the-road vehicles as well.

    Using CarGoNet in place of side walls can reduce load weight and allow for greater hauling capacity. That saves on fuel costs and labor costs while producing a better yield each trip.

    Car-Go-Net™ from Industrial Netting
    • Improves highway safety
    • Virtually weightless design increases load yield
    • Complies with new regulations for transport of crushed cars
    • Disposable
    • Economical
    • Easy to apply
    • Wide variety of roll sizes
    • Highly visible
    • Minimal wind resistance
    • Design strength in use, yet easily shredded after use


    Choose from a variety of CarGoNet™ products in stock, in a range of roll widths and lengths to fit your style of application.

    Product Specifications

    Car-Go-Net™
    Product
    Number    		 Roll Width Roll Weight Roll Length Color

    1670
    3/4" Mesh
    		 42" 50#
    28#
    13#
    9#    		 5000'
    2500'
    1000'
    500'    		 Orange
    56" 65#
    34#
    16#
    10#    		 5000'
    2500'
    1000'
    500'    		 Orange
    84" 100#
    55#
    25#
    17#    		 5000'
    2500'
    1000'
    500'    		 Orange
    102" 130#
    67#
    32#
    20#    		 5000'
    2500'
    1000'
    500'    		 Orange
    168" 200#
    110#
    50#
    33#    		 5000'
    2500'
    1000'
    500'    		 Orange
    204" 260#
    135#
    65#
    40#    		 5000'
    2500'
    1000'
    500'    		 Orange

    5340
    1/4" Mesh
    		 42" 75#
    40#
    20#
    11#    		 5000'
    2500'
    1000'
    500'    		 Orange
    56" 90#
    50#
    21#
    13#    		 5000'
    2500'
    1000'
    500'    		 Orange
    84" 150#
    80#
    40#
    22#    		 5000'
    2500'
    1000'
    500'    		 Orange
    102" 180#
    100#
    43#
    26#    		 5000'
    2500'
    1000'
    500'    		 Orange
    168" 300#
    160#
    80#
    44#    		 5000'
    2500'
    1000'
    500'    		 Orange
    204" 365#
    200#
    86#
    52#    		 5000'
    2500'
    1000'
    500'    		 Orange
    *Custom widths and lengths available.

    Easy Application of Car-Go-Net™

    1. Wrapping Stacks
    Car-Go-Net can be used to wrap crushed cars before loading on trailer.

    A. Use a 17 foot roll to wrap horizontally over stack.

    B. Use either a 56 or 84 inch roll to wrap stack in pallet wrap style.

    2. Wrapping Trailers

    C. On the trailer, wrap two stacks horizontally with a 17 foot roll first. Then repeat wrap on the second layer of stacks to "blanket" the load.

    D. Use a 14 foot roll to wrap all stacks on the trailer in pallet wrap style.

      Important Compliance Information: In order for Car-Go-Net to comply with regulation 393.132 for securing flat or crushed vehicles the product must be installed in the following manner.

      1. The netting must extend to the height of the cargo and prevent loose parts from falling from all four sides of the vehicle.
      2. The netting must be secured to the deck of the trailer to prevent loose parts that have fallen to the deck to work their way under the netting and off the load.
      3. The synthetic mesh or netting must have openings that are not larger than the smallest loose parts.

      *Compliance with item #3 can be determined by looking through the mesh for loose parts that have fallen from the load. If these parts are not smaller than the openings in the plastic mesh then compliance with item #3 has been achieved.

      *A containment mesh may have an opening caused by cutting or tearing of the material. This can be repaired by the hauler with use of poly-clips or cable ties available through InteNet.

    Rail Car Net
    • Improves highway safety
    • Virtually weightless design increases load yield
    • Complies with new regulations for transport of crushed cars
    • Disposable
    • Economical load containment
    • Easy to apply
    • Wide variety of roll sizes
    • Highly visible
    • Minimal wind resistance
    • Design strength in use, yet easily shredded after use
    Product Specifications

    Rail Car Netting
    Product
    Number    		 Roll Width Roll Weight Roll Length Core Size
    (inside dia.)    		 Color

    1670
    3/4" Mesh
    		 168" 200#
    110#
    33#    		 5000'
    2500'
    500'    		 4"
    4"
    4"    		 Orange
    or
    Black
    204" 260#
    135#
    40#    		 5000'
    2500'
    500'    		 4"
    4"
    4"    		 Orange
    or
    Black

    5340
    1/4" Mesh
    		 168" 300#
    160#
    44#    		 5000'
    2500'
    500'    		 4"
    4"
    4"    		 Orange
    or
    Black
    204" 365#
    200#
    52#    		 5000'
    2500'
    500'    		 4"
    4"
    4"    		 Orange
    or
    Black
    *Custom widths and lengths available.



    ISO 9001:2000 certified


    26 Years of Excellence 1981-2007
    7681 Setzler Pkwy N.
    Minneapolis, MN 55445
    800-328-8456 (in USA and Canada)
    Phone: 763-496-6355 ¤ Fax: 763-496-6356
    E-mail: info@industrialnetting.net


    Plastic Mesh | Metal Mesh | Sieves | Services | Contact Us
    Printed Literature | Survey | About Us | Sitemap | Home