 |
Interpreting Dimensions
RackGuard pallet rack safety netting is produced as an extruded matrix and stocked in master rolls. While RackGuard is easily trimmed with wire cutters or tin snips, most installers prefer to purchase custom cut sizes to simplify the installation. The diagram below illustrates critical dimensions.
In the majority of RackGuard installations the Outside Strand to Outside Strand dimension is the most critical so custom cuts will be produced to that dimension unless otherwise specified.
Outside Edge to Outside Edge includes the 'nubs' that result from custom cutting to specific widths and lengths. This dimension may come into play when RackGuard is used for shelf dividers or bin dividers. If your installation requires that the outside nubs be contained within a certain dimension, please specify that the required edge to edge dimension is a maximum allowable dimension.
ISO9001 certified
|
7681 Setzler Pkwy N.
Minneapolis, MN 55445
800-328-8456 (in USA and Canada)
Phone: 763-496-6355 ¤ Fax: 763-496-6356
E-mail: info@industrialnetting.net
|
|
| | | | | | | |
|
 |
