Nylon, Polyester or Polypropylene Plastic Mesh

Industrial Netting provides Woven Plastic Mesh with Perpendicular StrandsMonofilament synthetic fibers can be woven very precisely to create industrial textiles with narrow pore distribution. This precision weaving process creates fine mesh woven fabrics with apertures (hole sizes) as small as 50 micron, with a strand and thickness tolerance of +/-10%.

The construction of plastic cloth is determined by the yarn type, yarn size and thread count. Monofilament yarns are a single continuous filament which produces a relatively smooth surface. In plain weave constructions the straight-through pores of monofilament fabrics offer minimal flow restriction and surface loading of particles.

These versatile precision woven fabrics meet stringent technical requirements in automotive, biomedical, chemical processing, and water treatment applications. Common applications include insert-molded filters for air and fuel filter cartridges, fuel injector nozzles, and liquid filter bags. As you can see Woven Mesh is very commonly used for Filtration applications.

Woven Mesh Measurements from Industrial NettingThread Count of a fabric refers to the number of threads per inch. Warp threads run lengthwise in a fabric. Weft or filling threads run across the width of a fabric at right angles to the warp. Since monofilament fabrics are produced with equal yarn diameters and equal thread counts in both the warp and weft directions, the mesh opening is square.

Choose from a wide range of plastic mesh sizes made from Nylon, Polyester or Polypropylene.

Note: Woven Plastic Mesh is typically shipped in roll form wound on cores to prevent creases. Occasional flaws that can affect the continuous roll length are inherent in the weaving process. Excessive handling can increase static that entraps random particles.The yarns used in the manufacture of these products are not officially FDA approved but they are virgin, raw materials that are suitable for food contact.

  • Close up of Industrial Netting WN0200 Natural Colored Nylon Woven Mesh, 45 percent open area
    Product: WN0200
    Hole Size (in) 0.008 
    Thickness (in) 0.008 
    Roll Width (in) 72 
    Open Area 45% 
  • Close up of Industrial Netting WN0300 Natural Colored Nylon Woven Mesh, 44 percent open area
    Product: WN0300
    Hole Size (in) 0.012 
    Thickness (in) 0.001 
    Roll Width (in) 72 
    Open Area 44% 
  • Close up of Industrial Netting WN0400 Natural Colored Nylon Woven Mesh, 45 percent open area
    Product: WN0400
    Hole Size (in) 0.016 
    Thickness (in) 0.013 
    Roll Width (in) 72 
    Open Area 45% 
  • Close up of Industrial Netting WN0500 Natural Colored Nylon Woven Mesh, 49 percent open area
    Product: WN0500
    Hole Size (in) 0.020 
    Thickness (in) 0.014 
    Roll Width (in) 72 
    Open Area 49% 
  • Close up of Industrial Netting WP0200 Natural Colored Polypropylene Woven Mesh, 44 percent open area
    Product: WP0200
    Hole Size (in) 0.008 
    Thickness (in) 0.014 
    Roll Width (in) 72 
    Open Area 44% 
  • Close up of Industrial Netting WS0200 Natural Colored Polyester Woven Mesh, 41 percent open area
    Product: WS0200
    Hole Size (in) 0.008 
    Thickness (in) 0.006 
    Roll Width (in) 62 
    Open Area 41%