Plastic Mesh Cores & Containment for Filtration

Use extruded mesh plastic tubes as center core supports and outer cages to build your cartridge filters.  Nearly 100 configurations of diameter, wall thickness and open area are available from stock.  Unlike molded tubes, minimal tooling costs are required for custom designs.  Get the right combination of flow characteristics and structural support.

Rigid Mesh Tube measurements by Industrial Netting

Rigid plastic tubes are extruded to produce fixed apertures with maximum dimensional stability.  Most cores are made from polypropylene resin that complies with FDA regulations for food contact.  Industrial Netting plastic cores are used in cartridges and as components for air, liquid and gas separation and filtration.

Common lengths are in stock for immediate shipment - or have us precision cut to your required sizes.  Contact us for more information or to request a quote.

Tolerance capabilities are impacted by tube diameter, wall thickness, strand configuration and cut length. Please consult your Industrial Netting representative for specific tolerances achievable on your plastic rigid mesh tube.

Tube Nominal Dimensions Brochure Tube Nominal Dimensions Brochure downloadable as a PDF.

Filtration Brochure Filtration Brochure downloadable as a PDF.

Custom Sizes

Don't see what you need below? We can custom fabricate tubes to larger diameters from a variety of flat mesh or nonwoven products.  Contact us now for more information.

  • Close-up of Industrial Netting RN3370 Rigid Mesh Polypropylene Tube, .93" ID and 1.055" OD
    Product: RN3370
    ID (inside diameter) 0.93
    OD (outside diameter) 1.055
    Wall Thickness 0.063
    Open Area 48%
  • Close-up of Industrial Netting RN2161 Rigid Mesh Polypropylene Tube, 1.015" ID and 1.19" OD
    Product: RN2161
    ID (inside diameter) 1.015
    OD (outside diameter) 1.19
    Wall Thickness 0.088
    Open Area 49%
  • Close-up of Industrial Netting RN2390 Rigid Mesh Polypropylene Tube, 1.15" ID and 1.33" OD
    Product: RN2390
    ID (inside diameter) 1.15
    OD (outside diameter) 1.33
    Wall Thickness 0.09
    Open Area 51%
  • Close-up of Industrial Netting RN1500 Rigid Mesh Polypropylene Tube, 1.495" ID and 1.615" OD
    Product: RN1500
    ID (inside diameter) 1.495
    OD (outside diameter) 1.615
    Wall Thickness 0.06
    Open Area 46%
  • Close-up of Industrial Netting RN4465 Rigid Mesh Polypropylene Tube, 2.27" ID and 2.44" OD
    Product: RN4465
    ID (inside diameter) 2.27
    OD (outside diameter) 2.44
    Wall Thickness 0.085
    Open Area 46%
  • Close-up of Industrial Netting RN3540 Rigid Mesh Polypropylene Tube, 2.475" ID and 2.625" OD
    Product: RN3540
    ID (inside diameter) 2.475
    OD (outside diameter) 2.625
    Wall Thickness 0.075
    Open Area 60%
  • Close-up of Industrial Netting RN5640 Rigid Mesh Polypropylene Tube, 2.69" ID and 2.89" OD
    Product: RN5640
    ID (inside diameter) 2.69
    OD (outside diameter) 2.89
    Wall Thickness 0.1
    Open Area 49%
  • Close-up of Industrial Netting RN7480 Rigid Mesh Polypropylene Tube, 2.865" ID and 3.045" OD
    Product: RN7480
    ID (inside diameter) 2.865
    OD (outside diameter) 3.045
    Wall Thickness 0.09
    Open Area 50%