Plastic Mesh Cores & Containment for Filtration

Use extruded mesh plastic tubes as center core supports and outer cages to build your cartridge filters.  Nearly 100 configurations of diameter, wall thickness and open area are available from stock.  Unlike molded tubes, minimal tooling costs are required for custom designs.  Get the right combination of flow characteristics and structural support.

Rigid Mesh Tube measurements by Industrial Netting

Rigid plastic tubes are extruded to produce fixed apertures with maximum dimensional stability.  Most cores are made from polypropylene resin that complies with FDA regulations for food contact.  Industrial Netting plastic cores are used in cartridges and as components for air, liquid and gas separation and filtration.

Common lengths are in stock for immediate shipment - or have us precision cut to your required sizes.  Contact us for more information or to request a quote.

Tolerance capabilities are impacted by tube diameter, wall thickness, strand configuration and cut length. Please consult your Industrial Netting representative for specific tolerances achievable on your plastic rigid mesh tube.

Tube Nominal Dimensions Brochure Tube Nominal Dimensions Brochure downloadable as a PDF.

Filtration Brochure Filtration Brochure downloadable as a PDF.

Custom Sizes

Don't see what you need below? We can custom fabricate tubes to larger diameters from a variety of flat mesh or nonwoven products.  Contact us now for more information.

  • Close-up of Industrial Netting RN2330 Rigid Mesh Polypropylene Tube, 3.105" ID and 3.345" OD
    Product: RN2330
    ID (inside diameter) 3.105
    OD (outside diameter) 3.345
    Wall Thickness 0.12
    Open Area 49%
  • Close-up of Industrial Netting RN1600 Rigid Mesh Polypropylene Tube, 3.115" ID and 3.335" OD
    Product: RN1600
    ID (inside diameter) 3.115
    OD (outside diameter) 3.335
    Wall Thickness 0.11
    Open Area 32%
  • Close-up of Industrial Netting RN2300 Rigid Mesh Polypropylene Tube, 3.395" ID and 3.60" OD
    Product: RN2300
    ID (inside diameter) 3.395
    OD (outside diameter) 3.6
    Wall Thickness 0.103
    Open Area 32%
  • Close-up of Industrial Netting RN2301 Rigid Mesh Polypropylene Tube, 3.395" ID and 3.61" OD
    Product: RN2301
    ID (inside diameter) 3.395
    OD (outside diameter) 3.61
    Wall Thickness 0.107
    Open Area 45%
  • Close-up of Industrial Netting RB2353 Rigid Mesh Polyethylene Tube, 3.52" ID and 3.70" OD
    Product: RB2353
    ID (inside diameter) 3.52
    OD (outside diameter) 3.7
    Wall Thickness 0.09
    Open Area 31%
  • Close-up of Industrial Netting RN2305 Rigid Mesh Polypropylene Tube, 3.57" ID and 3.885" OD
    Product: RN2305
    ID (inside diameter) 3.57
    OD (outside diameter) 3.885
    Wall Thickness 0.158
    Open Area 49%
  • Close-up of Industrial Netting RN2307 Rigid Mesh Polypropylene Tube, 3.58" ID and 3.85" OD
    Product: RN2307
    ID (inside diameter) 3.58
    OD (outside diameter) 3.85
    Wall Thickness 0.135
    Open Area 51%
  • Close-up of Industrial Netting RN3531 Rigid Mesh Polypropylene Tube, 3.59" ID and 3.785" OD
    Product: RN3531
    ID (inside diameter) 3.59
    OD (outside diameter) 3.785
    Wall Thickness 0.098
    Open Area 22%
  • Close-up of Industrial Netting RN3530 Rigid Mesh Polypropylene Tube, 3.65" ID and 3.785" OD
    Product: RN3530
    ID (inside diameter) 3.65
    OD (outside diameter) 3.785
    Wall Thickness 0.068
    Open Area 33%
  • Close-up of Industrial Netting RN1914 Rigid Mesh Polypropylene Tube, 3.77" ID and 3.895" OD
    Product: RN1914
    ID (inside diameter) 3.77
    OD (outside diameter) 3.895
    Wall Thickness 0.062
    Open Area 36%
  • Close-up of Industrial Netting RN2310 Rigid Mesh Polypropylene Tube, 3.785" ID and 4.085" OD
    Product: RN2310
    ID (inside diameter) 3.785
    OD (outside diameter) 4.085
    Wall Thickness 0.15
    Open Area 55%
  • Close-up of Industrial Netting RN1913 Rigid Mesh Polypropylene Tube, 3.84" ID and 3.965" OD
    Product: RN1913
    ID (inside diameter) 3.84
    OD (outside diameter) 3.965
    Wall Thickness 0.063
    Open Area 35%
  • Close-up of Industrial Netting RN1910 Rigid Mesh Polypropylene Tube, 3.86" ID and 3.985" OD
    Product: RN1910
    ID (inside diameter) 3.86
    OD (outside diameter) 3.985
    Wall Thickness 0.063
    Open Area 37%
  • Close-up of Industrial Netting RB2356 Rigid Mesh Polyethylene Tube, 4.035" ID and 4.28" OD
    Product: RB2356
    ID (inside diameter) 4.035
    OD (outside diameter) 4.28
    Wall Thickness 0.108
    Open Area 32%
  • Close-up of Industrial Netting RN3720 Rigid Mesh Polypropylene Tube, 4.08" ID and 4.225" OD
    Product: RN3720
    ID (inside diameter) 4.08
    OD (outside diameter) 4.225
    Wall Thickness 0.073
    Open Area 34%
  • Close-up of Industrial Netting RN1950 Rigid Mesh Polypropylene Tube, 4.14" ID and 4.425" OD
    Product: RN1950
    ID (inside diameter) 4.14
    OD (outside diameter) 4.425
    Wall Thickness 0.142
    Open Area 53%
  • Close-up of Industrial Netting RN1912 Rigid Mesh Polypropylene Tube, 4.15" ID and 4.29" OD
    Product: RN1912
    ID (inside diameter) 4.15
    OD (outside diameter) 4.29
    Wall Thickness 0.07
    Open Area 36%
  • Close-up of Industrial Netting RB2354 Rigid Mesh Polyethylene Tube, 4.52" ID and 4.74" OD
    Product: RB2354
    ID (inside diameter) 4.52
    OD (outside diameter) 4.74
    Wall Thickness 0.11
    Open Area 32%