Plastic Mesh Cores & Containment for Filtration

Use extruded mesh plastic tubes as center core supports and outer cages to build your cartridge filters.  Nearly 100 configurations of diameter, wall thickness and open area are available from stock.  Unlike molded tubes, minimal tooling costs are required for custom designs.  Get the right combination of flow characteristics and structural support.

Rigid Mesh Tube measurements by Industrial Netting

Rigid plastic tubes are extruded to produce fixed apertures with maximum dimensional stability.  Most cores are made from polypropylene resin that complies with FDA regulations for food contact.  Industrial Netting plastic cores are used in cartridges and as components for air, liquid and gas separation and filtration.

Common lengths are in stock for immediate shipment - or have us precision cut to your required sizes.  Contact us for more information or to request a quote.

Tolerance capabilities are impacted by tube diameter, wall thickness, strand configuration and cut length. Please consult your Industrial Netting representative for specific tolerances achievable on your plastic rigid mesh tube.

Tube Nominal Dimensions Brochure Tube Nominal Dimensions Brochure downloadable as a PDF.

Filtration Brochure Filtration Brochure downloadable as a PDF.

Custom Sizes

Don't see what you need below? We can custom fabricate tubes to larger diameters from a variety of flat mesh or nonwoven products.  Contact us now for more information.

  • Close-up of Industrial Netting RN2000 Rigid Mesh Polypropylene Tube, 1.08" ID and 1.32" OD
    Product: RN2000
    ID (inside diameter) 1.08
    OD (outside diameter) 1.32
    Wall Thickness 0.12
    Open Area 33%
  • Close-up of Industrial Netting RN2020 Rigid Mesh Polypropylene Tube, 1.08" ID and 1.33" OD
    Product: RN2020
    ID (inside diameter) 1.08
    OD (outside diameter) 1.33
    Wall Thickness 0.125
    Open Area 30%
  • Close-up of Industrial Netting RN8691 Rigid Mesh Polypropylene Tube, 1.08" ID and 1.32" OD
    Product: RN8691
    ID (inside diameter) 1.08
    OD (outside diameter) 1.32
    Wall Thickness 0.12
    Open Area 22%
  • Close-up of Industrial Netting RN3293 Rigid Mesh Polypropylene Tube, 1.14" ID and 1.39" OD
    Product: RN3293
    ID (inside diameter) 1.14
    OD (outside diameter) 1.39
    Wall Thickness 0.125
    Open Area 21%
  • Close-up of Industrial Netting RN2390 Rigid Mesh Polypropylene Tube, 1.15" ID and 1.33" OD
    Product: RN2390
    ID (inside diameter) 1.15
    OD (outside diameter) 1.33
    Wall Thickness 0.09
    Open Area 51%
  • Close-up of Industrial Netting RN3291 Rigid Mesh Polypropylene Tube, 1.155" ID and 1.385" OD
    Product: RN3291
    ID (inside diameter) 1.155
    OD (outside diameter) 1.385
    Wall Thickness 0.115
    Open Area 14%
  • Close-up of Industrial Netting RN2370 Rigid Mesh Polypropylene Tube, 1.20" ID and 1.38" OD
    Product: RN2370
    ID (inside diameter) 1.2
    OD (outside diameter) 1.38
    Wall Thickness 0.09
    Open Area 35%
  • Close-up of Industrial Netting RN2632 Rigid Mesh Polypropylene Tube, 1.265" ID and 1.48" OD
    Product: RN2632
    ID (inside diameter) 1.265
    OD (outside diameter) 1.48
    Wall Thickness 0.108
    Open Area 15%
  • Close-up of Industrial Netting RN2630 Rigid Mesh Polypropylene Tube, 1.27" ID and 1.48" OD
    Product: RN2630
    ID (inside diameter) 1.27
    OD (outside diameter) 1.48
    Wall Thickness 0.105
    Open Area 15%
  • Close-up of Industrial Netting RN2540 Rigid Mesh Polypropylene Tube, 1.275" ID and 1.46" OD
    Product: RN2540
    ID (inside diameter) 1.275
    OD (outside diameter) 1.46
    Wall Thickness 0.093
    Open Area 40%