Plastic Mesh Cores & Containment for Filtration

Use extruded mesh plastic tubes as center core supports and outer cages to build your cartridge filters.  Nearly 100 configurations of diameter, wall thickness and open area are available from stock.  Unlike molded tubes, minimal tooling costs are required for custom designs.  Get the right combination of flow characteristics and structural support.

Rigid Mesh Tube measurements by Industrial Netting

Rigid plastic tubes are extruded to produce fixed apertures with maximum dimensional stability.  Most cores are made from polypropylene resin that complies with FDA regulations for food contact.  Industrial Netting plastic cores are used in cartridges and as components for air, liquid and gas separation and filtration.

Common lengths are in stock for immediate shipment - or have us precision cut to your required sizes.  Contact us for more information or to request a quote.

Tolerance capabilities are impacted by tube diameter, wall thickness, strand configuration and cut length. Please consult your Industrial Netting representative for specific tolerances achievable on your plastic rigid mesh tube.

Tube Nominal Dimensions Brochure Tube Nominal Dimensions Brochure downloadable as a PDF.

Filtration Brochure Filtration Brochure downloadable as a PDF.

Custom Sizes

Don't see what you need below? We can custom fabricate tubes to larger diameters from a variety of flat mesh or nonwoven products.  Contact us now for more information.

  • Close-up of Industrial Netting RN1885 Rigid Mesh Polypropylene Tube, .67" ID and .965" OD
    Product: RN1885
    ID (inside diameter) 0.67
    OD (outside diameter) 0.965
    Wall Thickness 0.147
    Open Area 17%
  • Close-up of Industrial Netting RN2020 Rigid Mesh Polypropylene Tube, 1.08" ID and 1.33" OD
    Product: RN2020
    ID (inside diameter) 1.08
    OD (outside diameter) 1.33
    Wall Thickness 0.125
    Open Area 30%
  • Close-up of Industrial Netting RN3293 Rigid Mesh Polypropylene Tube, 1.14" ID and 1.39" OD
    Product: RN3293
    ID (inside diameter) 1.14
    OD (outside diameter) 1.39
    Wall Thickness 0.125
    Open Area 21%
  • Close-up of Industrial Netting RN1481 Rigid Mesh Polypropylene Tube, 1.385" ID and 1.65" OD
    Product: RN1481
    ID (inside diameter) 1.385
    OD (outside diameter) 1.65
    Wall Thickness 0.133
    Open Area 29%
  • Close-up of Industrial Netting RN2325 Rigid Mesh Polypropylene Tube, 2.31" ID and 2.62" OD
    Product: RN2325
    ID (inside diameter) 2.31
    OD (outside diameter) 2.62
    Wall Thickness 0.155
    Open Area 37%
  • Close-up of Industrial Netting RN2315 Rigid Mesh Polypropylene Tube, 3.0" ID and 3.265" OD
    Product: RN2315
    ID (inside diameter) 3.0
    OD (outside diameter) 3.265
    Wall Thickness 0.13
    Open Area 48%
  • Close-up of Industrial Netting RN2305 Rigid Mesh Polypropylene Tube, 3.57" ID and 3.885" OD
    Product: RN2305
    ID (inside diameter) 3.57
    OD (outside diameter) 3.885
    Wall Thickness 0.158
    Open Area 49%
  • Close-up of Industrial Netting RN2307 Rigid Mesh Polypropylene Tube, 3.58" ID and 3.85" OD
    Product: RN2307
    ID (inside diameter) 3.58
    OD (outside diameter) 3.85
    Wall Thickness 0.135
    Open Area 51%
  • Close-up of Industrial Netting RN2310 Rigid Mesh Polypropylene Tube, 3.785" ID and 4.085" OD
    Product: RN2310
    ID (inside diameter) 3.785
    OD (outside diameter) 4.085
    Wall Thickness 0.15
    Open Area 55%
  • Close-up of Industrial Netting RN1950 Rigid Mesh Polypropylene Tube, 4.14" ID and 4.425" OD
    Product: RN1950
    ID (inside diameter) 4.14
    OD (outside diameter) 4.425
    Wall Thickness 0.142
    Open Area 53%