Oriented Plastic Netting
Oriented Plastic netting is lighter, wider and more flexible than our extruded square plastic mesh. Some configurations are available in widths up to 17-feet. Oriented plastic netting is most often used for reinforcement or containment (ex. RackGuard) or as a light-weight barrier (ex. Bird Net).
Oriented netting is produced by stretching extruded mesh in one or both directions under controlled conditions. Stretching the extruded mesh in both the machine direction and cross direction produces biaxially oriented polypropylene (BOPP) netting.
When the plastic netting is oriented or stretched, the strand shape is altered. Generally, the shape of an oriented strand is somewhat hour-glassed, with the strands becoming wider near the joint. Oriented plastic netting also has a higher profile, where the joint thickness is greater than the strand thickness.
The extrusion and orientation processes are controlled for the number of strands over a given distance (typically the average number of plastic strands over a 10-inch span) to produce a nominal average hole opening or aperture. Colorants and additives can be introduced during the extrusion process to produce distinct colors or properties such as stabilization against ultraviolet light degradation.
Most products below are in stock as master rolls. We can custom convert to a size that suits your unique plastic netting needs. Our wide array of process capabilities can produce a custom net to meet your requirements.
Product: ON3350Color NaturalHole Size (in) 1/14 x 1/4Roll Width (in) 168Roll Length (ft) 3000PMSF (lbs/1000 sq ft) 21.5
Product: ON6200Color NaturalHole Size (in) 1/8 x 1/8Roll Width (in) 168Roll Length (ft) 5000PMSF (lbs/1000 sq ft) 7
Product: ON6275Color NaturalHole Size (in) 1/6 x 1/6Roll Width (in) 73Roll Length (ft) 30000PMSF (lbs/1000 sq ft) 1.5
Product: ON9565Color NaturalHole Size (in) 1/6 x 1/6Roll Width (in) 96Roll Length (ft) 10000PMSF (lbs/1000 sq ft) 3.25