Plastic Square Mesh Netting

Extruded Plastic Square Mesh Netting from Industrial Netting for a Variety of Industrial ApplicationsThe joint structure of Plastic square netting is quite different from Extruded Plastic Diamond Mesh.  Machine direction strands run the length of the roll and cross direction strands run the width of the roll.  Joints are formed at the interesection and are not stacked one over the other as in diamond net mesh plastic netting.

Generally, the machine direction strand is thicker than the cross direction strand. The overall thickness of the netting is typically determined by the machine direction strand thickness.  As a result of this joint configuration, plastic square netting usually has one side of the material that is smooth, that is, both the machine and cross strands are flush on the same plane, and one side that is "bumpy", where the machine direction strand has a higher profile than the cross strands.

Square mesh plastic netting is extruded in a wide range of configurations featuring:

  • Structural integrity
  • Apertures "locked" by fused joints
  • Smooth surface on one side

Most products from Industrial Netting are available in bulk rolls or custom cut sizes. Choose from a broad range of apertures and thicknesses - or consult with a representative to help identify a specific product for your intended use. Utilize Industrial Nettings' custom converting services to recieve the specific sized netting for your needs.

Tolerances vary with apertures (hole sizes), weights, thicknesses and widths

  • Close-up of Industrial Netting XN6080 Natural Polypropylene Square Mesh, .021 x .027 inch
    Product: XN6080
    Hole Size (in) .021 x .027 
    Thickness (in) 0.014 
    Roll Width (in) 37.5 
    Open Area 35% 
  • Close-up of Industrial Netting XN6080 Natural Polypropylene Square Mesh, .021 x .027 inch
    Product: XN6080
    Hole Size (in) .021 x .027 
    Thickness (in) 0.014 
    Roll Width (in) 30.59 
    Open Area 35% 
  • Close-up of Industrial Netting XR6065 Red Polypropylene Square Mesh, .025 x .030 inch
    Product: XR6065
    Hole Size (in) 0.025 x 0.030 
    Thickness (in) 0.014 
    Roll Width (in) 43.5 
    Open Area 35% 
  • Close-up of Industrial Netting XN6070 Natural Polypropylene Square Mesh, .025 x .030 inch
    Product: XN6070
    Hole Size (in) 0.025 X 0.030 
    Thickness (in) 0.014 
    Roll Width (in) 43.5 
    Open Area 35% 
  • Close-up of Industrial Netting XN1588 Natural Polypropylene Square Mesh, .085 x .105 inch
    Product: XN1588
    Hole Size (in) 0.085 X 0.105 
    Thickness (in) 0.05 
    Roll Width (in) 43.5 
    Open Area 37% 
  • Close-up of Industrial Netting XN1335 Natural Polypropylene Square Mesh, .085 x .115 inch
    Product: XN1335
    Hole Size (in) 0.085 X 0.115 
    Thickness (in) 0.069 
    Roll Width (in) 42 
    Open Area 35%