Plastic Square Mesh Netting
The joint structure of Plastic square netting is quite different from Extruded Plastic Diamond Mesh. Machine direction strands run the length of the roll and cross direction strands run the width of the roll. Joints are formed at the interesection and are not stacked one over the other as in diamond net mesh plastic netting.
Generally, the machine direction strand is thicker than the cross direction strand. The overall thickness of the netting is typically determined by the machine direction strand thickness. As a result of this joint configuration, plastic square netting usually has one side of the material that is smooth, that is, both the machine and cross strands are flush on the same plane, and one side that is "bumpy", where the machine direction strand has a higher profile than the cross strands.
Square mesh plastic netting is extruded in a wide range of configurations featuring:
- Structural integrity
- Apertures "locked" by fused joints
- Smooth surface on one side
Most products from Industrial Netting are available in bulk rolls or custom cut sizes. Choose from a broad range of apertures and thicknesses - or consult with a representative to help identify a specific product for your intended use. Utilize Industrial Nettings' custom converting services to recieve the specific sized netting for your needs.
Tolerances vary with apertures (hole sizes), weights, thicknesses and widths
Product: XN6070Hole Size (in) 0.025 X 0.030Thickness (in) 0.014Roll Width (in) 43.5Open Area 35%
Product: XN3019Hole Size (in) 0.030 X 0.037Thickness (in) 0.036Roll Width (in) 47.5Open Area 20%
Product: XN5170Hole Size (in) 0.040 X 0.053Thickness (in) 0.019Roll Width (in) 43.5Open Area 50%
Product: XN3234Hole Size (in) 0.054 X 0.080Thickness (in) 0.019Roll Width (in) 54.5Open Area 65%
Product: XN1588Hole Size (in) 0.085 X 0.105Thickness (in) 0.05Roll Width (in) 43.5Open Area 37%
Product: XN1673Hole Size (in) 0.145 X 0.175Thickness (in) 0.035Roll Width (in) 44Open Area 70%
Product: XN2950Hole Size (in) 0.150 X 0.220Thickness (in) 0.048Roll Width (in) 37.5Open Area 55%