Plastic Diamond Mesh Netting

Extruded Plastic Diamond Mesh Netting by Industrial NettingPlastic diamond net mesh netting is produced with the strands in opposite directions overlaying each other. This joint structure is quite different from the Square Mesh Extruded Plastic Netting structure. The overall thickness of extruded plastic diamond netting will essentially be twice the thickness of each strand, although there will typically be some melding of the strands at the joint.

Normally, the strands in each direction are produced uniformly, and the product looks the same from one side of the material as the other. This type of netting is marketed as "bi-planar", where both sides are structurally the same and the strands are forming a plane or channel along the net.

Most products are available from inventory in bulk rolls or custom cut sizes. Utilize Industrial Nettings' Custom Converting Services to receive the specific sized netting for your needs. Some of these services include slitting, sheeting, or die cutting. Choose from a broad range of hole apertures, thicknesses, and material resins - or contact us to help identify a specific product for your intended application.

Diamond Mesh Netting will stretch under tension causing the hole shape to elongate in one direction and narrow in the other.  This "accordion affect" causes the tensioned dimension to shorten and the perpendicular dimension to grow as material relaxes.  Tolerances only apply at time of cutting.

Tolerances vary with apertures (hole sizes), weights, thicknesses and roll widths

  • Close-up of Industrial Netting XB1160 Black Polyethylene Diamond Mesh, .083 x .083 inch
    Product: XB1160
    Hole Size (in) 0.083 x 0.083 
    Thickness (in) 0.06 
    Roll Width (in) 26 
    Open Area  
  • Close-up of Industrial Netting XN4510 Natural Polypropylene Diamond Mesh, .094 x .094 inch
    Product: XN4510
    Hole Size (in) 0.094 x 0.094 
    Thickness (in) 0.08 
    Roll Width (in) 24 
    Open Area 45% 
  • Close-up of Industrial Netting XN4840 Natural Polypropylene Diamond Mesh, .120 x .120 inch
    Product: XN4840
    Hole Size (in) 0.120 x 0.120 
    Thickness (in) 0.065 
    Roll Width (in) 40.5 
    Open Area 64% 
  • Close-up of Industrial Netting XB1130 Black Polyethylene Diamond Mesh, .125 x .125 inch
    Product: XB1130
    Hole Size (in) 0.125 x 0.125 
    Thickness (in) 0.05 
    Roll Width (in) 36 
    Open Area  
  • Close-up of Industrial Netting XN4700 Natural Polypropylene Diamond Mesh, .197 x .197 inch
    Product: XN4700
    Hole Size (in) 0.197 x 0.197 
    Thickness (in) 0.1 
    Roll Width (in) 37.5 
    Open Area 66% 
  • Close-up of Industrial Netting XB1131 Black Polyethylene Diamond Mesh, .25 x .25 inch
    Product: XB1131
    Hole Size (in) 0.25 x 0.25 
    Thickness (in) 0.08 
    Roll Width (in) 48 
    Open Area