Etched Stainless Steel Screens from Industrial Netting

Photo-Chemically
Etched Stainless

Electroformed Screens (nickel, copper, and gold)

Sieves

Precision Etched
Pin Holes

Advantages of Etched Screens (Photo Chemical Machining):

No mechanical stresses built into product
Etched screens have no burrs or rough edges
Properties of metals are consistent and not altered
5 levels of hardness are available in all sizes with minimum orders
Precision mesh designs are available in stock or by custom order

Industrial Netting is ISO 9001 Certified for its suppliers and itself and continues it through strict quality control procedures that are carefully adhered to through out the process. Quality control includes statistical sampling for measurement compliance and 100% visual inspection on completion.

Chemically etched screens are key parts of rotary screen applications such as fruit separators, sugar processing, micro electronics, telecommunications, optics, aviation, computers, bio metrics and medical Celerons.

Tooling costs are minimal because of the use of ultra precise Mylar tools produced on precision plotters using conical light sources for direct etching of a transmittal image. Custom shapes, sizes and filters are available in metals such as nickel, stainless steel, and copper.

Many of the products (SAE and Metric) identified below are in stock and available for immediate shipment. Please contact us for any changes in stock status or specifications.

Product Specifications

MicroEtch® Stainless Steel Screen (SAE)
Product Number	Thickness (inches)	Hole Size (inches)	Hole Size (microns)	Hole Profile (see note below)	Pitch center-to-center (inches)	Orientation (alignment of holes to one another)	Nominal Open Percent Area	Material Type	Material Hardness
BE 1500	0.015	0.018	457	B	0.0310	60°	31.0%	304	1/2 hard
BE 1501	0.015	0.018	457	B	0.0310	60°	31.0%	316	full hard
BE 1400	0.014	0.018	457	B	0.0310	60°	31.0%	316	1/4 hard
BE 1401	0.014	0.018	457	B	0.0310	60°	31.0%	316	annealed
BE 1402	0.014	0.020	508	B	0.0420	60°	21.0%	316	annealed
BE 1403	0.014	0.015	381	A	0.0310	60°	21.0%	316	annealed
BE 1000	0.010	0.0115	292	A	0.0220	60°	25.0%	301	full hard
BE 0800	0.008	0.024	610	A	0.0420	60°	30.0%	316	1/4 hard
BE 0801	0.008	0.012	305	A	0.0220	60°	27.0%	316	annealed
BE 0802	0.008	0.010	254	A	0.0220	60°	19.0%	316	annealed
BE 0803	0.008	0.009	229	B	0.0155	90°	26.0%	316	1/4 hard
BE 0804	0.008	0.007	178	A	0.0220	60°	9.0%	316	annealed
BE 0805	0.008	0.009	229	A	0.0155	60°	31.0%	316	annealed
BE 0806	0.008	0.009	229	A	0.0155	60°	31.0%	316L	1/4 hard
BE 0807	0.008	0.009	229	A	0.0155	60°	31.0%	304	3/4 hard
BE 0808	0.008	0.009	229	A	0.0155	60°	31.0%	316	full hard
BE 0809	0.008	0.014	356	A	0.0220	60°	37.0%	304L	annealed
BE 0810	0.008	0.009	229	A	0.0155	60°	31.0%	304L	annealed
BE 0601	0.006	0.006	152	A	0.0155	90°	11.0%	316	annealed
BE 0602	0.006	0.008	203	A	0.0155	90°	21.0%	316	annealed
BE 0500	0.005	0.006	152	A	0.0112	60°	27.0%	316	1/2 hard
BE 0501	0.005	0.006	152	B	0.0100	90°	28.0%	316	full hard
BE 0502	0.005	0.006	152	A	0.0120	60°	21.0%	316	1/4 hard
BE 0503	0.005	0.011	279	B	0.0170	60°	38.0%	316	annealed
BE 0200	0.002	0.003	76	B	0.0060	60°	23.0%	304	full hard
BE 0201	0.002	0.003	76	A	0.0060	60°	23.0%	304	full hard

Key:

Hole Profile: A = Coned Hole, B = Etched equally from both sides
Minimum manufacturing run for non-stock products is 2 panels.

Quality perforated area of panels measures 18" x 21" minimum.

Thickness tolerance is +/-10%.

Hole size tolerance is +/-15% of material thickness.

Material Temper (hardness) Availability:

Annealed

1/8 hard

1/4 hard

3/8 hard

1/2 hard

5/8 hard

3/4 hard

hard

full hard

Product Specifications

MicroEtch® Stainless Steel Screen (Metric)
Product Number	Thickness (mm)	Hole Size (mm)	Hole Size (microns)	Hole Profile (see note below)	Pitch center-to-center (mm)	Orientation (alignment of holes to one another)	Nominal Open Percent Area	Material Type	Material Hardness
BE 1500	0.3810	0.4572	457	B	0.7874	60°	31.0%	304	1/2 hard
BE 1501	0.3556	0.4572	457	B	0.7874	60°	31.0%	316	full hard
BE 1400	0.3810	0.4572	457	A	0.7874	60°	31.0%	316	1/4 hard
BE 1401	0.3556	0.4572	457	B	0.7874	60°	31.0%	316	annealed
BE 1402	0.3556	0.5080	508	B	1.0668	60°	21.0%	316	annealed
BE 1403	0.3556	0.3810	381	A	0.7874	60°	21.0%	316	annealed
BE 1000	0.2540	0.2921	292	A	0.5588	60°	25.0%	301	full hard
BE 0800	0.2032	0.6096	610	A	1.0668	60°	30.0%	316	1/4 hard
BE 0801	0.2032	0.3048	305	A	0.5588	60°	27.0%	316	annealed
BE 0802	0.2032	0.2540	254	A	0.5588	60°	19.0%	316	annealed
BE 0803	0.2032	0.2286	229	B	0.3937	90°	26.0%	316	1/4 hard
BE 0804	0.2032	0.1778	178	A	0.5588	60°	9.0%	316	annealed
BE 0805	0.2032	0.2286	229	A	0.3937	60°	31.0%	316	annealed
BE 0806	0.2032	0.2286	229	A	0.3937	60°	31.0%	316L	1/4 hard
BE 0807	0.2032	0.2286	229	A	0.3937	60°	31.0%	304	3/4 hard
BE 0808	0.2032	0.2286	229	A	0.3937	60°	31.0%	316	full hard
BE 0809	0.2032	0.3556	356	A	0.5588	60°	37.0%	304L	annealed
BE 0810	0.2032	0.2286	229	A	0.3937	60°	31.0%	304L	annealed
BE 0601	0.1524	0.1524	152	A	0.3937	90°	11.0%	316	annealed
BE 0602	0.1524	0.2032	203	A	0.3937	90°	21.0%	316	annealed
BE 0500	0.1270	0.1524	152	A	0.2845	60°	27.0%	316	1/2 hard
BE 0501	0.1270	0.1524	152	B	0.2540	90°	28.0%	316	full hard
BE 0502	0.1270	0.1524	152	A	0.3048	60°	21.0%	316	1/4 hard
BE 0503	0.1270	0.2794	279	B	0.4318	60°	38.0%	316	annealed
BE 0200	0.0508	0.0762	76	B	0.1524	60°	23.0%	304	full hard
BE 0201	0.0508	0.0762	76	A	0.1524	60°	23.0%	304	full hard

Key:

View and print our product literature:

Photo-Chemically Etched Stainless Steel Brochure

ISO 9001 Certified

7681 Setzler Pkwy N.
Minneapolis, MN 55445
800-328-8456 (in USA and Canada)
Phone: 763-496-6355 ¤ Fax: 763-496-6356
E-mail: info@industrialnetting.net

Content on this page requires a newer version of Adobe Flash Player.