Extruded PET or PBT Plastic Netting

Nylon Resin Mesh suitable for high temperature environments

Polypropylene is the most cost effective choice for ambient temperatures but the heat deflection temperature is just 194°F (90°C). It softens at 305°F (152°C) and melts at 323°F (161°C).

Contrast that with Extruded Nylon 6 which reaches its softening point at 374°F (190°C) and melts at 428°F (220°C).

Polyester mesh is suitable for continuous use to 270°F (132°C). PBT mesh offers heat resistance to 420°F (216°C) and low temperature performance down to -40°F (-40°C). We also offer a PET/PP blend suitable for temperatures to 400°F.

Our PTFE expanded plastic mesh is rated for continuous use temperatures up to 500°F (260°C).

High Temperature mesh is available in a variety of configurations. PTFE mesh is produced by slitting and expanding. A precision weaving process is used to create polyester or nylon woven mesh with openings as small as 1 micron.

Nylon and PTFE products are made from resin that complies with FDA regulations for food contact.

Extruded mesh made from PET/PP blend, nylon, or PBT resin 

  • Close-up of Industrial Netting NN4975 Natural Nylon Diamond Mesh, .010 x .010 inch
    Product: NN4975
    Color Natural
    Hole Size (in) 0.010 x 0.010
    Roll Width (in) 36
    Roll Length (ft) 250
    Thickness (in) 0.017
  • Close-up of Industrial Netting NN3100 Natural Nylon Diamond Mesh, .050 x .050 inch
    Product: NN3100
    Color Natural
    Hole Size (in) 0.050 x 0.050
    Roll Width (in) 44
    Roll Length (ft) 500
    Thickness (in) 0.02
  • Close-up of Industrial Netting NN4825 Natural Nylon Diamond Mesh, .100 x .100 inch
    Product: NN4825
    Color Natural
    Hole Size (in) 0.100 x 0.100
    Roll Width (in) 42.5
    Roll Length (ft) 500
    Thickness (in) 0.034